Delta 46-715 Owner's Manual download pdf (Page 5)

MOUNTING THE WOOD ON

THE DELTA 46-715 14" LATHE

Attach the arbor, provided, to the DELTA 46-715

Lathe. Mount the wood on the arbor and place the 1-

5/8" cupped washer on the arbor next to the wood.

Screw on the 1/2" nut and tighten using the 3/4"

wrench provided.

ATTACHING THE 744 RING

MASTER® TO DELTA 46-715 14"

LATHE

1. Position the 744 RING MASTER® over lathe way

bars as shown.

2. Place the 744 RING MASTER® Assembly with

Lock Bar (Item H) into middle of way bars as shown.

(Note: Lock Bar is already assembled to 744 RING

MASTER® assembly.)

3. Place Clamp Bar (Item J) in way bars positioned as

shown.

4. Insert 1/2" Socket Screw (Item K) through Clamp Bar

(Item J) and into threaded hole in the Lock Bar (Item

H).

5. Slide the RING MASTER® towards the Head Stock

of the DELTA LATHE until the wood is directly over

the

center of the RING MASTER®.

6. Tighten the 1/2" Socket Screw with a 3/8" hex

wrench. DONOT OVER TIGHTEN THIS SCREW.

This provides a clamping effect on the way bars to

secure the 744 RING MASTER® to the DELTA

lathe. If in later use the 744 RING MASTER®

assembly seems loose, slightly tighten the 1/2" Socket

Screw. Be sure to lock the head stock in place.

PRIOR TO ANY POWER ON OF YOUR DELTA

LATHE, be sure to refer to your DELTA owners

manual lathe turning chapter for complete

information on the correct operation of the Lathe.

LATHE

WAY BARS

HEAD

STOCK

TAIL

STOCK

FIGURE 3

1 2 3 4 5 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments

Delta 46-715 Owner's Manual Page 5

Comments to this Manuals

Related products and manuals for Lathes Delta 46-715