Delta 46-745 Instruction Manual download pdf (Page 22)

Use a light oil to lubricate eccentric (A) Fig. 79, and pivot points (B) on both the headstock and the tailstock. (Tailstock

illustrated).

Use the tip of a screwdriver (A) Fig. 80 to press on the opening, and drop light oil into the handwheel cover (B) of the

tailstock.

LUBRICATION

7. While holding the control panel (A) Fig. 77 with one hand, remove the cover (B) Fig. 77. To prevent the control panel

(A) from falling, loosely re-attach the Allen screw (B) Fig. 76 to the control panel.

8. Replace belt.

9. To assemble, reverse the procedure.

Fig. 75

5. Use a Phillips screwdriver (A) Fig. 75 to remove the five cover screws (B) (three of which are shown). The other two

screws are located under the power cords.

6. With a 5/16” Allen wrench (A) Fig 75, remove Allen screw (B) Fig. 76. NOTE: When re-assembling, make sure that

the screw passes completely through the pivoting control bracket and into the headstock, allowing the headstock

cover to pivot.

Fig. 76

Fig. 77

Fig. 78

Fig. 79

Fig. 77

1 2 ... 17 18 19 20 21 22 23 24

No comments

Delta 46-745 Instruction Manual Page 22