Delta Digital timer User Manual download pdf (Page 50)

Programming:

Memory:

I/O Extensions:

Communication Module:

For Industry:

For Commercial / Building Sector:

Programming can be carried out independently using the keys on the Genie NX

base module with the help of ladder diagram & on a PC, using "Genie NX Soft"

software.

When using a PC, programming can be carried out either in Ladder Language.

Backlighting of the display will be there for minimum 15 seconds & by direct

action of the keys on the base module or by using the "Device Utilities "option

in Genie NX Soft application software.

Genie NX has a back up memory, which allows programs to be transferred or

copied into another Genie NX with the help of memory card. This feature

enables quick copy of the programs without the use of a laptop or PC.

User can connect maximum 3 Extension Modules to the Genie NX base module

& each Extension Module has 8 inputs and 4 outputs, so we can expand up to 48

I/O extensions if necessary via the Genie NX. Expansions are made in daisy

chain fashion.

A module for communication on the Modbus network is available, which is

called "NX-Comm. "to facilitate communication of the logic relay over a 2 wire

half duplex RS 485 link. Modules are powered by 110- 240 VAC or 12- 24 VDC

supplies. The base module can be connected to this communication interface by

means of the cable supplied and the communication takes place via the NX-

Comm. on the RS 485 link.

• Printing and Packaging machines

• Ancillary equipments in textile, plastic.

• Material handling equipments, conveyor .

• Interlocking units in distributed control systems.

• Automation of barriers

• Automation of compressors and pumps for air conditioning requirements

• Automation of lights

LCD Backlighting:

systems

FEATURES

APPLICATIONS

Programmable Logic Controller

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 73 74

No comments

Delta Digital timer User Manual Page 50