Delta 36-255L Instruction Manual download pdf (Page 11)

Fig. 11

Fig. 10

Fig. 9

FASTENING MACHINE TO

SUPPORTING SURFACE

Before operating your compound miter saw, firmly mount

it to a workbench or other supporting surface. Four

holes, (A) Fig. 9, are provided for fastening the saw to a

supporting surface.

When frequently moving the saw from place to place,

mount the saw to a 3/4” piece of plywood. The saw can

then be easily moved from place to place and the

plywood can be clamped to the supporting surface using

“C” clamps.

OPERATION

STARTING AND STOPPING MACHINE

To start the machine, depress switch trigger (A) Fig. 10. To stop

the machine, release the switch trigger.

This saw is equipped with an automatic electric blade brake.

As soon as the switch trigger (A) Fig. 10, is released, the

electric brake is activated and stops the blade in seconds.

A TURNING SAW BLADE CAN BE

DANGEROUS. AFTER COMPLETING CUT, RELEASE

SWITCH TRIGGER (A) FIG. 10, TO ACTIVATE BLADE

BRAKE. KEEP CUTTINGHEAD DOWN UNTIL BLADE HAS

COME TO A COMPLETE STOP.

THE TORQUE DEVELOPED DURING

BRAKING MAY LOOSEN THE ARBOR SCREW (E) FIG. 42.

THE ARBOR SCREW SHOULD BE CHECKED

PERIODICALLY AND TIGHTENED IF NECESSARY.

LOCKING SWITCH IN THE “OFF” POSITION

IMPORTANT: When the miter saw is not in use, the

switch should be locked in the OFF position using a

padlock (B) Fig. 11, with a 3/16" diameter shackle to

prevent unauthorized use of the saw.

OPERATIONAL CONTROLS AND ADJUSTMENTS

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

No comments

Delta 36-255L Instruction Manual Page 11