Delta 36-953 Instruction Manual download pdf (Page 28)

TROUBLESHOOTING

For assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or call

the DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).

MAINTENANCE

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network

of Porter-Cable • Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional

information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location

of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

KEEP MACHINE CLEAN

Periodically blow out all air passages with dry compressed

air. All plastic parts should be cleaned with a soft damp

cloth. NEVER use solvents to clean plastic parts. They could

possibly dissolve or otherwise damage the material.

Wear ANSI Z87.1 safety glasses while

using compressed air.

FAILURE TO START

Should your machine fail to start, check to make sure the

prongs on the cord plug are making good contact in the

outlet. Also, check for blown fuses or open circuit breakers

in the line.

LUBRICATION

Apply household floor paste wax to the machine table and

extension table or other work surface weekly.

PROTECTING CAST IRON FROM RUST

To clean and protect cast iron tables from rust, you will

need the following materials: 1 pushblock from a jointer,

1 sheet of medium Scotch-Brite™ Blending Hand Pad, 1

can of WD-40

, 1 can of degreaser, 1 can of TopCote

Aerosol. Apply the WD-40 and polish the table surface

with the Scotch-Brite pad using the pushblock as a

holddown. Degrease the table, then apply the TopCote

accordingly.

SERVICE

1 2 ... 23 24 25 26 27 28 29 30 31 32

No comments

Delta 36-953 Instruction Manual Page 28