Delta CL180BN Instruction Manual

To learn more about DELTA MACHINERY visit our website at: www.deltamachinery.com.For Parts, Service, Warranty or other Assistance,please call1-800-223

1014. Do not charge battery pack when the temperature is BELOW 40°F(4.4°C) or ABOVE 104°F(40°C). This is very important for proper operation.15. Do no

11As a battery pack approaches the discharged state, you will notice a sharpdrop in tool performance. When the tool is unable to perform the task atha

12INSTALLING OR REMOVING BATTERY PACKAlways set the triggerswitch to the locked OFF positionwhen installing or removing thebattery pack.TO INSTALL BAT

13OPERATIONComplete all steps of “LOADING FASTENERS” before using the tool.1. Install the battery pack.2. To fire, grip tool firmly to maintaincontrol

14TROUBLESHOOTING For assistance with your tool, visit our website at www.deltamachinery.comfor a list of service centers or call the Delta Machinery

15KEEP TOOL CLEANPeriodically blow out all air passages with dry compressed air. All plastic partsshould be cleaned with a soft damp cloth. NEVER use

16WARRANTYACCESSORIESA complete line of accessories is available from your Porter-Cable•DeltaSupplier, Porter-Cable•Delta Factory Service Centers, and

The following are trademarks of PORTER-CABLE •DELTA (Las siguientes son marcas registradas de PORTER-CABLE •DELTA S.A.) (Lesmarques suivantes sont des

2TABLE OF CONTENTS Read and understand all warnings and operating instructionsbefore using any tool or equipment. When using tools or equipment, basi

3indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.indicates a potentially hazardous situation

4Read all instructions Failure to follow allinstructions listed below may result in electric shock, fire and/orserious injury. The term "power to

5c) Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying power tools with your finger on the switch or plu

65) Battery tool use and carea) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack

7ADDITIONAL SPECIFIC SAFETY RULES1. Keep fingers AWAY from trigger when not driving fasteners to avoid accidental firing. Never carry tool with finger

8SYMBOL DEFINITIONV ... voltsA ... amperesHz ... hertzW ... wattsk

9SAFETY INSTRUCTIONS FOR CHARGER AND BATTERIES1. SAVE THESE INSTRUCTIONS. This manual contains important safety and operating instructions for Delta B