Delta DBS125 Instruction Manual

Browse online or download Instruction Manual for Nail Gun Delta DBS125. Delta DBS125 Instruction manual User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 15
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
To learn more about DELTA MACHINERY
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
please call
1-800-223-7278 (In Canada call 1-800-463-3582).
INSTRUCTION MANUAL
Brad Nailer/Stapler
(Models DBN125,
DBS125, DNS100)
PART NO. A04051 - 04-16-04
Copyright © 2004 Delta Machinery
ESPAÑOL: PÁGINA 15
FRANÇAISE : PAGE 27
Model DBN125 Shown
Note: Rockler may not carry all products and/or sizes listed in this vendor's publication
31285
RTD10000170AA
Page view 0
1 2 3 4 5 6 ... 14 15

Summary of Contents

Page 1 - Brad Nailer/Stapler

To learn more about DELTA MACHINERY visit our website at: www.deltamachinery.com.For Parts, Service, Warranty or other Assistance,please call1-800-223

Page 2

10The depth to which a fastener is driven is controlled by the depth adjustmentknob (A) Fig. 25. The depth of drive is factory adjusted to a nominal s

Page 3 - IMPORTANT SAFETY INSTRUCTIONS

11CLEARING A JAMMED FASTENERDisconnect tool from air supply.1. Open magazine and remove remaining fasteners (Fig. 28 and Fig. 29).Remove fasteners fro

Page 4 - GENERAL SAFETY RULES

12CLEAN AND INSPECT DAILYDisconnect tool from air supply before cleaning andinspection. Correct all problems before placing the tool back in use.Wipe

Page 5

13TROUBLESHOOTINGDisconnect tool from air supply before performing any ServiceProcedure.SYMPTOM PROBLEMS SOLUTIONS1. Air leak near top of Loose screws

Page 6

14A complete line of accessories is available from your Porter-Cable • DeltaSupplier, Porter-Cable • Delta Factory Service Centers, and Delta Authoriz

Page 7 - FUNCTIONAL DESCRIPTION

The following are trademarks of PORTER-CABLE •DELTA (Las siguientes son marcas registradas de PORTER-CABLE •DELTA S.A.) (Lesmarques suivantes sont des

Page 8 - PREPARING THE TOOL

2Date of Manufacture:___________________________Fecha de fabricación:, Date de fabrication:Serial No:______________________________________Número de s

Page 9 - OPERATING INSTRUCTIONS

3indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.indicates a potentially hazardous situation

Page 10 - RUBBER NOSE CUSHION

4Fig. 6Fig. 5Fig. 2Fig. 3Fig. 41. Read and understand tool labels andmanual. Failure to follow warnings couldresult in DEATH or SERIOUS INJURY. Fig. 1

Page 11 - CLEARING A JAMMED FASTENER

59. Do not connect tool to pressure whichpotentially exceeds 200 PSI (13.7 BAR).10. All air line components (hoses,connectors, filters, regulators, et

Page 12 - MAINTENANCE

621. Remove finger from trigger when notdriving fasteners. Never carry tool with fingeron trigger. In “Contact Actuation Mode” toolwill fire a fastene

Page 13 - TROUBLESHOOTING

7Employer must enforce compliance with the safety warnings and all otherinstructions contained in this manual.Keep this manual available for use by al

Page 14 - ACCESSORIES

8Fig. 19Fig. 18Fig. 21Fig. 23AFig. 22AFig. 20PREPARING THE TOOL1. After reading and understanding this entire manual, connect tool toair supply (Fig.

Page 15 - PC-0104-151

9USING THE TOOL Complete all steps of PREPARING THE TOOL before using the tool.This tool is shipped from the factory with a “single sequential actuati

Comments to this Manuals

No comments