Delta PD-01 Specifications download pdf (Page 13)

PROFIBUS DP Slave Communicaion Module RTU-PD01

DVP-PLC Operation Manual

Configuration item Configurable device Configuration method

1 AI

2 AI

4 AI

8 AI

1 AO

2 AO

4 AO

8 AO

1 AIAO

2 AIAO

4 AIAO

8 AIAO

Special I/O modules connected to RTU-PD01

Self-defined

configuration method

for special I/O module

8.3 Settings of Configuration Items

8.3.1 Settings of Configuration Items for Digital I/O Modules

There are 2 types of configuration items for digital I/O modules, standard configuration and

self-defined configuration. By standard configuration, the digital I/O module is named after its

actual name, whereas it is named after the number of points by self-defined configuration. You do

not have to set up parameters in the configuration. The digital I/O can correspond to the master

directly after the configuration

8.3.2 Settings of Configuration Items for Special I/O Modules

The special I/O module is named after its actual name in the configuration. You can configure

special I/O module by standard configuration items. Detailed configuration methods will be

explained in the following paragraphs.

z Configuration method for DVP06AD-S and DVP04AD-S

Refer to the figure below for the relevant parameters to configure DVP06AD-S. DVP04AD-S and

DVP06AD-S have the same parameters to set, except that DVP06AD-S has two more parameters for

input channels to set than does DVP04AD-S (Therefore, only the parameter settings for DVP06AD-S

are introduced in this section).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

No comments

Delta PD-01 Specifications Page 13