Delta PD-01 Specifications Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
PROFIBUS DP Slave Communicaion Module RTU-PD01
DVP-PLC Operation Manual
19
z Configuration method for 8AIAO, 4AIAO, 2AIAO and 1AIAO modules
Refer to the figure below
for the relevant parameters to configure an 8AIAO module. 8AIAO, 4AIAO,
2AIAO and 1AIAO modules have the same parameters to set, except that the number of configurable
CRs in 1AIAO, 2AIAO and 4AIAO modules is different from that of 8AIAO module (Therefore, only the
parameter settings for 8AIAO are introduced in this section).
Definitions of configuration items:
Parameter Value Definition
Location 0 ~ 7
The location of the special I/O module at the
right side of RTU-PD01. The location of the first
special I/O module at the right side of
RTU-PD01 is 0, the second is 1 and so forth.
This rule is only applicable on special I/O
modules.
Module
DVP04AD
DVP06AD
DVP02DA
DVP04DA
DVP06XA
DVP04PT
DVP04TC
DVP01PU
Special I/O module in use
Input CR number 1:
Slave Master
0 ~ 48
Input CR number 2 0 ~ 48
Input CR number 3 0 ~ 48
Input CR number 4 0 ~ 48
Input CR number 5 0 ~ 48
Input CR number 6 0 ~ 48
Input CR number 7 0 ~ 48
Input CR number 8 0 ~ 48
No. of the CR in special I/O module to be read
by PROFIBUS DP master
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

Comments to this Manuals

No comments