Delta PD-01 Specifications download pdf (Page 23)

PROFIBUS DP Slave Communicaion Module RTU-PD01

DVP-PLC Operation Manual

Definitions of configuration items:

Parameter Value Definition

Node ID 1 ~ 254 Address of Modbus device connected to RTU-PD01

Read address 1: Slave →

Master

0 ~ 65535

Read address 2 0 ~ 65535

Read address 3 0 ~ 65535

Read address 4 0 ~ 65535

Read address 5 0 ~ 65535

Read address 6 0 ~ 65535

Read address 7 0 ~ 65535

Read address 8 0 ~ 65535

Parameter address of Modbus device to be read by

PROFIBUS DP master

z Configuration method for Modbus8 write address, Modbus 4 write address, Modbus 2 write address,

and Modbus 1 write address

Refer to the figure below for the relevant parameters to configure Modbus 8 write address. Modbus 8

write address, Modbus 4 write address, Modbus 2 write address and Modbus 1 write address have

the same parameters to set, except that the addresses of configurable Modbus device for Modbus 4

write address, Modbus 2 write address and Modbus 1 write address are different from that of Modbus

8 write address (Therefore, only the parameter settings for Modbus 8 write address are introduced in

this section).

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

No comments

Delta PD-01 Specifications Page 23