Delta PD-01 Specifications download pdf (Page 39)

PROFIBUS DP Slave Communicaion Module RTU-PD01

DVP-PLC Operation Manual

7. Slot 0 and Slot 1 are for the configuration of digital I/O modules. The configuration of digital I/O

modules does not require other parameter settings. When you configure digital I/O modules by

self-defined method, and if the number of I/O points is less than 8, the calculation will be based on

the number 8. For example, Slot 1 is configured 8DIDO, and its corresponding digital I/O module is

DVP08SP (4 input points and 4 output points). See the following paragraph for detailed

corresponding relations between slots and I/O modules.

8. Double click the configured Slot 2 in “HW Config” window to open the dialog box in the figure below.

Refer to 8.3.2 for the definition of every parameter in this dialog box.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44

No comments

Delta PD-01 Specifications Page 39