Delta SOLIVIA 5.0 Installation Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
EN
9Operation and installation manual SOLIVIA 5.0 AP G3 TR
The solar inverter contains no components that are to be maintained or repaired by
the operator or installer. All repairs must be performed by Delta.
Observe all points in this installation and operation manual!
Before working on the solar inverter, you must disconnect it from the grid and the
PV modules.
Do not disconnect any cables when the solar inverter is under load, as there is a
risk of an arc fault.
To prevent lightning strikes, follow the regulations applicable in your country.
The surface of the solar inverter can get very hot.
The solar inverter is heavy (see „10. Technical data“, page 34). The solar inverter
must always be lifted by two people.
The solar inverter has a high leakage current value (see „10. Technical data“,
page 34). The ground wire MUST be connected before the start of operation.
Only equipment in accordance with SELV (EN 60950) may be connected to the
RS485 interfaces.
Do not remove any warning signs that the manufacturer has installed on the solar
inverter.
In order for IP65 protection to be granted, all used and unused connections must
be sufciently sealed.
4. Scope of delivery
SOLAR INVERTER SOLIVIA 5.0 AP G3 TR
Mounting plate
Operation and installation manual
AC connector
5. System
The solar inverter converts direct current from the solar cells into alternating current.
This enables you to feed your self-produced solar energy into the public grid.
Thanks to efcient MPP tracking, maximum capacity utilization of the solar energy plant
is ensured even in the case of cloudy sky conditions.
The string concept means that PV modules are always connected in series (in a string)
and/or that strings with the same voltage are connected in parallel to the solar inverter
with the aim of signicantly reducing the photovoltaic system’s cabling requirements.
The fact that the modules are connected in strings also means that the photovoltaic
system can be perfectly matched to the solar inverters input voltage range.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Comments to this Manuals

No comments