Delta 70-200 Instruction Manual

Browse online or download Instruction Manual for Power drills Delta 70-200. Delta 70-200 Instruction manual User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 21
  • Table of contents
  • BOOKMARKS
  • Rated4.6 / 5. Based on13 customer reviews
Page view 0
INSTRUCTION MANUAL
PART NO. A10355 - 04-06-05
Copyright © 2005 Delta Machinery
ESPAÑOL: PÁGINA 21
To learn more about DELTA MACHINERY
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
please call
1-800-223-7278 (In Canada call 1-800-463-3582).
20" Drill Press
(Model 70-200)
Page view 0
1 2 3 4 5 6 ... 20 21

Summary of Contents

Page 1 - 20" Drill Press

INSTRUCTION MANUALPART NO. A10355 - 04-06-05Copyright © 2005 Delta MachineryESPAÑOL: PÁGINA 21To learn more about DELTA MACHINERY visit our website at

Page 2 - IMPORTANT SAFETY INSTRUCTIONS

10Fig. 16Fig. 17Fig. 18MOUNTING THE MACHINE1. If your drill press is to be used in one permanentlocation, the drill press base must be secured to thes

Page 3 - CALIFORNIA PROPOSITION 65

11Fig. 2Fig. 3ASSEMBLING THEDRILL PRESS1. Assemble column (A) Fig. 2, to base (B) using four M12 x 45mm long hex head screws (three of which areshown

Page 4 - GENERAL SAFETY RULES

12Fig. 43. Assemble worm gear (J) Fig. 4, to the inside of hole(K) in table bracket (H).4. Thread table lock lever (M) Fig. 4, into hole in tablebrack

Page 5 - SAVE THESE INSTRUCTIONS

138. Reassemble collar (D) Fig. 7, which was removed inSTEP 1, to column. IMPORTANT: Bottom of collar (D)MUST NOT be pushed all the way down onto top

Page 6 - GROUNDING INSTRUCTIONS

14Fig. 1111. Place the drill press head on column, as shown. Lineup head with base and tighten two head locking screws(R) Fig. 11.12. Thread the three

Page 7 - EXTENSION CORDS

15OPERATIONAL CONTROLS AND ADJUSTMENTSFig. 23START/STOP CONTROLSThe start/stop buttons are located on the front of the drillpress head. To start the m

Page 8 - FUNCTIONAL DESCRIPTION

16Fig. 27Fig. 28Fig. 29DRILLING HOLES TO DEPTHWhere a number of holes are to be drilled to exactly thesame depth, a depth stop is provided in the pini

Page 9 - CARTON CONTENTS

17Fig. 30TABLE ADJUSTMENTS1. The table can be raised or lowered on the column byloosening table clamp handle (A) Fig. 29, and turning thetable raising

Page 10 - ASSEMBLY

18BORING IN WOODTwist drills, although intended for metal drilling, may also be used for boring holes in wood. However, machine spurbits are generally

Page 11 - DRILL PRESS

19DRILLING METALUse clamps to hold the work when drilling in metal. The work should never be held in the bare hand; the lips of the drillmay seize the

Page 12

2TABLE OF CONTENTSRead and understand all warnings and operating instructions before using any tool or equipment. Whenusing tools or equipment, basic

Page 13

20PARTS, SERVICE OR WARRANTY ASSISTANCEAll Delta Machines and accessories are manufactured to high quality standards and are serviced by a networkof P

Page 14 - CHUCK KEY

The following are trademarks of PORTER-CABLE •DELTA (Las siguientes son marcas registradas de PORTER-CABLE • DELTA S.A.) (Les marquessuivantes sont de

Page 15

3Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.Indicates a potentially hazardous situation

Page 16 - RETURN SPRING

4GENERAL SAFETY RULESREAD AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFOREUSING THIS EQUIPMENT. Failure to follow all instructions listed

Page 17 - AND SPINDLE ADAPTER

5ADDITIONAL SPECIFIC SAFETY RULESFAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS INJURY.1. DO NOT OPERATE THIS MACHINE until it iscompletely assem

Page 18 - MACHINE USE

6A separate electrical circuit should be used for your machines. This circuit should not be less than #12 wire and shouldbe protected with a 20 Amp ti

Page 19 - MAINTENANCE

7EXTENSION CORDSUse proper extension cords. Make sure your extension cord is in good condition and is a 3-wireextension cord which has a 3-prong groun

Page 20 - WARRANTY

8FOREWORDThe Delta Model 70-200 Drill Press provides production capacity drilling and includes; 1 hp single phase 115/230 voltinduction motor, pulleys

Page 21 - • DELTA)

9CARTON CONTENTSUNPACKING AND CLEANINGCarefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating f

Comments to this Manuals

No comments