Delta 70-200 Instruction Manual download pdf (Page 9)

CARTON CONTENTS

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from

all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone,

gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household

floor paste wax.

Fig. 2

1. Drill Press Head

2. Table and Table Bracket

3. Column

4. Base

5. Chuck

6. Handle (3)

7. Spindle Adapter

8. Spindle Adapter Remover

9. 5mm Hex Wrench

10. 4mm Hex Wrench

11. 3mm Hex Wrench

12. Worm Gear

13. Table Raising and Lowering Handle

14. Table Lock Lever

15. Chuck Key

16. M8x1.25x125mm carriage head screws (4), flat

washers (8), lockwashers (4), and hex nuts (4) (for

fastening drill press to a supporting surface)

17. M12x1.5x40mm Hex Head Screws (4)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 20 21

No comments

Delta 70-200 Instruction Manual Page 9