Delta DP350 Instruction Manual download pdf (Page 7)

ASSEMBLY

ASSEMBLY TOOLS REQUIRED

ASSEMBLY TIME ESTIMATE

Assembly for this machine takes less than 1 hour.

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from

unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.

Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your

machine.

After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

For your own safety, do not connect the machine to the power source until the machine is

completely assembled and you read and understand the entire instruction manual.

3mm Hex Wrench

5mm Hex Wrench

Plastic Mallet

1. Attach the column (A) Fig. 1 to the base (B) with the

four screws, three of which are shown at (C). Loosen

the set screw (D) and remove the ring (E) and the

raising rack (F).

2. Place the worm gear (G) Figs. 2 and 3, in the table

bracket (H).

Fig. 1

Fig. 2

Fig. 3

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

No comments

Delta DP350 Instruction Manual Page 7