Delta 18657 Instruction Manual download pdf (Page 8)

8 - English

Fig. 2

Fig. E

Fig. F

ASSEMBLY

For your own safety, do not connect the machine to the power source until the machine is

completely assembled and you read and understand the entire instruction manual.

ASSEMBLY TOOLS REQUIRED

Cutterhead Wrench (Supplied)

ASSEMBLY TIME ESTIMATE

Approximately 1/2 hour

OPTIONAL 4" (101 mm) REVERSIBLE DUST COLLECTION ATTACHMENT

To attach an optional dust collection attachment (A) Fig. 1 to mount a dust collection system to the planer.

1. Remove the two screws (A) Fig. 2 that secure the cutterhead guard.

2. Place the dust connector in the slots provided and replace the cutterhead guard screws (A) Fig. 2.

NOTE: You can mount the attachment on either side of the machine.

Fig. 1

Fig. 2

1. 13" (330 mm) Two-Speed Finishing Planer

2. Cutterhead Adjusting Handle

3. Cutterhead Lock Handle

4. M5-16 mm Hex Socket Head Screw

5. M6-20 mm Hex Socket Head Screw

6. Knife Transfer Tool

7. Cutterhead Wrench and Handle Combination

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 53 54

No comments

Delta 18657 Instruction Manual Page 8