Delta 20-950 Instruction Manual download pdf (Page 7)

1. Drill Press Head

2. Table

3. Table Bracket and Column

4. Light

5. Base

6. Chuck

7. Handle (3)

8. Spindle Adapter

9. Drift Key

10. 5mm Hex Wrench

11. 3mm Hex Wrench

12. Table Raising and Lowering Handle

13. Table Clamp Handle

14. Chuck Key

CARTON CONTENTS

UNPACKING AND CLEANING

FIRE HAZARD. Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning

your machine. Such materials can easily catch fire. After cleaning, cover the unpainted surfaces with a good quality household

floor paste wax.

22 23

15. (3) M8x1.25x125mm carriage head screws, (4) flat

washers, (2) lockwashers, and (2) hex nuts (for

fastening drill press to a supporting surface)

16. M10x1.5x40mm Hex Head Screws (4)

17. M6x1x12mm Hex Cap Head Screw (2)

18. 1/4" Washer

19. Cord Strain Relief

20. Cord Clamp (2)

21. Cord Bushing

22. 12mm Hex Head Bolt

23. Belleville Washer

24. Screws (2)

25. Springs (2)

26. Forward tilt levers

Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from

unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.

1 2 3 4 5 6 7 8 9 10 11 12 ... 51 52

No comments

Delta 20-950 Instruction Manual Page 7