Delta 31-481 Operations Instructions Page 7
- Page / 50
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
7
PRODUCT SPECIFICATIONS
FUNCTIONAL DESCRIPTION
Model 31-481 DELTA
®
26” Dual Drum Sander is specifically designed to handle both rough and final sanding
processes in a single pass. This machine features an adjustable height automatic feed table and comes with 80-grit
and 120-grit pre-cut sanding belts already installed. This dual drum sander is powered by a 3HP continuous duty
sealed motor with a variable speed feed that enables you work at 3-20 S.F.P.M. The wide feed belt accepts stock as
big as 25 ½” and allows you to sand pieces up to 12 ¼” thick.
UNPACKING
The machine is heavy, be careful when removing it from the shipping container! Failure to comply
may cause serious injury and/or damage to the sander and/or property!
Your DELTA
®
Dual Drum Sander comes packed in a single container. Use a safety strap to avoid tip over when lifting
machine. Check shipping carton and machine for damage before unpacking.
Open the shipping container. Carefully remove packaging materials, parts and machine from shipping carton.
Always check for and remove protective shipping materials around motors and moving parts. Lay out all parts on a
clean work surface and check that all parts are present and in good condition:
DESCRIPTION (QUANTITY)
Delta 26” Dual Drum Sander (1)
12mm Open End Wrench (1)
Elevation Handle (1)
5mm Hex Wrench (1)
6mm T-Handle Wrench (1)
2mm T-Handle Wrench (1)
Elevation Bracket (1)
DRUM MOTOR SPECIFICATIONS
Type Induction Ball bearing/
Continuous Duty
Horsepower 3HP
Amps 16A
Voltage 230V
Phase Single
Hertz 60Hz
RPM 3,450
BELT FEED MOTOR SPECIFICATIONS
Type Universal
Horsepower 1/6
PRODUCT SPECIFICATIONS
Maximum sanding width 25-1/2”
Maximum board thickness 12-1/4”
Minimum board thickness ¼”
Minimum board length 6”
Feed Speed 3-20 FPM (variable)
Compare the items to inventory figures; verify that all items are accounted
for before discarding the shipping box. Report any missing or damaged
parts to your distributor or dealer. Prior to tool assembly and use, read
this manual thoroughly to familiarize yourself with proper assembly,
maintenance and safety procedures.
Remove any protective materials and coatings from all of the parts and the
drum sander. The protective coatings can be removed by spraying WD-40
on them and wiping it off with a soft cloth. This may need to be redone
several times before all of the protective coatings are removed completely.
If any parts are missing, do not attempt to plug in the power
cord and turn “ON” the machine. The machine should
only be turned “ON” after all the parts have been obtained and installed
correctly.
Number of Sanding Drums 2
Drum Size 5” x 26”
Drum Speed 1,550 RPM
Dust Ports 2-4”
PRODUCT DIMENSIONS
Footprint 17-3/4” x 43”
Length 31”
Width 46”
Height 53”
Weight 485 lbs.
SHIPPING DIMENSIONS
Carton Type Wooden Crate
Length 33”
Width 48”
Height 55”
Gross Weight 535 lbs.
- 26 IN. Dual Drum SaNDer 1
- TABLE OF CONTENTS 2
- IMPORTANT SAFETY INSTRUCTIONS 2
- GENERAL SAFETY RULES 3
- SAVE THESE INSTRUCTIONS 4
- POWER CONNECTIONS 5
- MOTOR SPECIFICATIONS 5
- GROUNDING INSTRUCTIONS 5
- KEY FEATURES AND COMPONENTS 6
- EXTENSION CORDS 6
- PRODUCT SPECIFICATIONS 7
- FUNCTIONAL DESCRIPTION 7
- UNPACKING 7
- ASSEMBLY 8
- ADJUSTMENTS 10
- OPERATION 13
- OPERATING TIPS 13
- TROUBLESHOOTING GUIDE 15
- ACCESSORIES 16
- WARRANTY 16
- REPLACEMENT PARTS 17
- SERVICE AND REPAIRS 17
- RÈGLES DE SÉCURITÉ GÉNÉRALES 19
- CONSERVER CES CONSIGNES 20
- BRANCHEMENTS 21
- SPÉCIFICATIONS DU MOTEUR 21
- DIRECTIVES DE MISE À LA TERRE 21
- RALLONGES 22
- SPÉCIFICATIONS DU PRODUIT 23
- DESCRIPTION DU FONCTIONNEMENT 23
- DÉBALLAGE 23
- ASSEMBLAGE 24
- AJUSTEMENTS 25
- FONCTIONNEMENT 29
- CONSEILS D’OPÉRATION 29
- CONSEILS 30
- ACCESSOIRES 32
- GARANTIE 32
- PIÈCES DE RECHANGE 33
- SERVICE ET RÉPARATIONS 33
- REGLAS GENERALES DE SEGURIDAD 35
- GUARDE ESTAS INSTRUCCIONES 36
- ESPECIFICACIONES DEL MOTOR 37
- INSTRUCCIONES DE CONEXIÓN 37
- CABLES DE EXTENSIÓN 38
- ESPECIFICACIONES DEL PRODUCTO 39
- DESCRIPCIÓN FUNCIONAL 39
- DESEMBALAJE 39
- PARA REEMPLAZAR LA 41
- CORREA DE LIJADO 41
- PARA AJUSTAR LA ALINEACIÓN 41
- DE LA CINTA DE ALIMENTACIÓN 41
- PARA AJUSTAR LA TENSIÓN DE 42
- LA CORREA DE TRANSMISIÓN 42
- FIG. 10FIG. 8 43
- PARA AJUSTAR EL 44
- PARALELISMO DE LOS 44
- TAMBORES DE LIJADO 44
- PARA AJUSTAR LA PRESIÓN DE 44
- LOS RODILLOS 44
- OPERACIÓN 45
- CONSEJOS PARA LA OPERACIÓN 45
- GUÍA DE SOLUCIÓN DE PROBLEMAS 47
- ACCESORIOS 48
- GARANTÍA 48
- PARTES DE REPUESTO 49
- SERVICIO Y REPARACIÓN 49
- 5530 Airport Road 50
- Anderson, SC 29626 50
- (800) 223-7278 50
Related products and manuals for Power sanders Delta 31-481
(60 pages)
Power sanders Delta 31-750 User Manual
(100 pages)
(100 pages)
Power sanders Delta SA446 Instruction Manual
(23 pages)
(23 pages)
Power sanders Delta 31-495 User Manual
(82 pages)
(82 pages)
Power sanders Delta 31-250 User Manual
(1 pages)
(1 pages)
Power sanders Delta 31 Instruction Manual
(21 pages)
(21 pages)
Power sanders Delta 31-483 User Manual
(10 pages)
(10 pages)
© 2020, manymanuals.com. All rights reserved. | 0.413 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals