Delta 31-482 Operations Instructions download pdf (Page 7)

PRODUCT SPECIFICATIONS

FUNCTIONAL DESCRIPTION

The DELTA

Oscillating Edge Sander is a professional-grade tool designed for both straight and angled edge-face

sanding as well as contour sanding. It is capable of sanding in either the vertical or horizontal plane. Your DELTA

Oscillating Edge Sander comes with a 100 grit sanding belt and is mounted on a cabinet base that provides ample

storage space for accessories. This tool is powered by a 1-1/2HP, 120/240V induction motor that drives the sanding

belt and provides an oscillation stroke of ½” at a rate of 108 strokes per minute.

UNPACKING

Your Oscillating Edge Sander comes packed in a single container. Open the shipping container and check that all

parts are present and in good condition:

TOOLS NEEDED

FOR ASSEMBLY

• Two 12mm wrenches or

sockets

• 10mm wrench or socket

• Flat head screw driver

• Phillips head screw

driver

• Rubber mallet

DESCRIPTION (QUANTITY)

Front Cabinet Panel with Door (1)

Rear Cabinet Panel (1)

Side Cabinet Panels (2)

Cabinet Shelf (1)

Rubber Feet (4)

Lock Knob - 35mm (1)

Lock Knob - 20mm (1)

Lock Knob - 12mm (2)

Contour Sanding Table (1)

Drum Guard/Dust Port (1)

Owner’s Manual (1)

Warranty Card (1)

Table Assembly (1)

Back Stop Bracket (1)

Belt Tension Handle (1)

Belt Tracking Tool (1)

Miter Gauge Assembly (1)

Sanding Belt (1)

Mounting Bracket (1)

HARDWARE

5/16” x 5/8” Screws (4)

5/16” Flat Washers (22)

5/16” Hex Nuts (12)

5/16” x 5/8” Hex Cap Bolts (8)

5/16” x 1-1/4” Hex Cap Bolts (2)

5/16” Flat Washers (4)

5/16” Lock Washers (10)

M5x10 Pan Head Screws (2)

M5 Flat Washers (2)

M5 Lock Washers (2)

1/4" x 5/8” Hex Cap Bolts (5)

1/4" Flat Washers (5)

1/4” Lock Washers (5)

10-24 x 3/4 Socket Head Cap

Screws (2)

Pan Head Screws (3)

T-Nuts (2)

Compare the contents of your container with the parts list to make sure all

parts are present and intact. Report any missing or damaged parts to your

distributor. Prior to tool assembly and use, read this manual thoroughly

to familiarize yourself with proper assembly, maintenance and safety

procedures.

Model 31-482

Fence (HxL) 4” x 24”

Abrasive Belt Size (WxL) 6” x 89”

Dust Chute Diameter 4”

Contour Sanding Table Size 9-3/4” x 11-3/4”

Table Size (LxW) 10” x 29-3/4”

Table Tilt 0-90°

Motor 1-1/2HP, 120/240V, 1PH, 60Hz, TEFC

Sanding Belt Speed 3900 FPM

Oscillation Stroke ½”

Oscillations per Minute 108

Overall Dimensions (LxWxH) 51”x26.5”x20”

Net Weight, approximate 218

Shipping Weight, approximate 233

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

Comments to this Manuals

No comments

Delta 31-482 Operations Instructions Page 7

Comments to this Manuals

Related products and manuals for Power sanders Delta 31-482