Delta 33-891 User Manual download pdf (Page 14)

Fig. 31

Fig. 32

5. Remove screw, flat washer and spacer (G) Fig. 31,

that fasten the front inside leaf guard (H) to front end of

blade guard (J). Assemble blade guard (J) to motor

assembly with locking rod (K).

6. Reassemble leaf guard (H) Fig. 31, to blade guard (J)

using screw, flat washer and spacer (G).

7. Fig. 32, illustrates the blade guard assembly

attached to the motor assembly.

NOTE: The lower retractable blade guard provides opera-

tor protection in an axial direction to the saw blade. Care

must be taken to eliminate potential hazards of the lower

blade guard.

A) KEEP YOUR HANDS AWAY FROM THE GUARD.

As the blade cuts, the guard will lift and leave part

of the blade exposed.

B) SHUT OFF POWER BEFORE FREEING A

JAMMED LOWER GUARD. The guard can get

jammed in previous kerfs in table or fence. Always

anticipate the path of the guard.

C) USE CAUTION when making bevel cuts to be sure

the lower guard is never pinched towards the

blade.

D) THE LOWER GUARD CAN JAM AGAINST THE

FENCE DURING NARROW IN-RIPS. Should the

guard jam against the fence, disconnect the saw

from power source, wait for the blade to stop, then

lift the blade guard and rest it on top of the fence.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

No comments

Delta 33-891 User Manual Page 14