Delta 36-841 User Manual download pdf (Page 37)

CONSTRUCTING A FEATHERBOARD

Fig. 135, illustrates dimensions for making a typical featherboard. The material which the featherboard is constructed

of, should be a straight piece of wood that is free of knots and cracks. Featherboards are used to keep the work in

contact with the fence and table and help prevent kickbacks. Clamp the featherboards to the fence and table so that

the leading edge of the featherboards will support the workpiece until the cut is completed. Use featherboards for all

non “thru-sawing” operations where the guar

d and spreader assembly must be removed (see Fig. 136). Always r

eplace

the guar

d and spreader assembly when the non thru-sawing operation is completed.

Fig. 135

Fig. 136

Kerf should be

about 1/4" apart.

BLADE GUARD ACCESSORIES

Deluxe Uniguard

Blade Guard

The Delta Model 34-976 Uniguard Blade Guard with

Splitter and Anti-kickback Fingers Fig. 137, is an

accessory that can be used in place of the standard

blade guard that is supplied with the Unisaw. The Delta

Model 34-976 Uniguard Blade Guard can be mounted to

the Unisaw, the Unisaw with a Jet-Lock rip fence, the

Unisaw with a 52" Unifence, or 30" Unifence.

78-953 Uniguard Strap Kit. Kit replaces the rear angle

rail of Biesemeyer 30" and 50" Commercial Fence

Systems and Home Shop Fence Systems up to 52" for

mounting the No. 34-976 Delta Uniguard Blade Guard.

Mounting hardware included.

Fig. 137

Biesemeyer

T-Square

Table

Saw Blade Guard System

The Biesemeyer Model 78-960 Biesemeyer T-Square

Table Saw Blade Guard System Fig. 138, is an accessory

that can be used in place of the standard blade guard

that is supplied with the Unisaw.

Catalog Listing Biesemeyer T-Square Blade Guard

Systems

78-960 10" System for Home Shop 52" and Commercial

50" Fence Systems. With T-arm assembly, blade guard,

splitter, installation bracket, mounting hardware and

instruction manual.

78-955 10" System for Home Shop 28", 40" and

Commercial 26", 30" and 38" Fence Systems. Same as

78-960 except for fence systems 40" and under.

Fig. 138

1 2 ... 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Delta 36-841 User Manual Page 37

Comments to this Manuals

Related products and manuals for Power saws Delta 36-841