Delta 17-965 Instruction Manual

Browse online or download Instruction Manual for Power tools Delta 17-965. Delta 17-965 Instruction manual User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 17
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated4.7 / 5. Based on21 customer reviews
Page view 0
INSTRUCTION MANUAL
PART NO. A10351 - 03-31-05
Copyright © 2005 Delta Machinery
ESPAÑOL: PÁGINA 17
To learn more about DELTA MACHINERY
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
please call
1-800-223-7278 (In Canada call 1-800-463-3582).
16-1/2" Floor Model
Drill Press
(Model 17-965)
Page view 0
1 2 3 4 5 6 ... 16 17

Summary of Contents

Page 1 - Drill Press

INSTRUCTION MANUALPART NO. A10351 - 03-31-05Copyright © 2005 Delta MachineryESPAÑOL: PÁGINA 17To learn more about DELTA MACHINERY visit our website at

Page 2 - IMPORTANT SAFETY INSTRUCTIONS

10OPERATIONAL CONTROLS AND ADJUSTMENTS8. Open the chuck jaws as wide as possible by turning chucksleeve (T) Fig. 8. Hold the chuck (S) Fig. 8 and care

Page 3 - CALIFORNIA PROPOSITION 65

11LOCKING SWITCH IN THE “OFF” POSITIONIMPORTANT: When the machine is not in use, the switch should be locked in the “OFF” position to prevent unauthor

Page 4 - GENERAL SAFETY RULES

12CHANGING SPEEDS AND ADJUSTING BELT TENSION1. Open the top cover (A) Fig. 18.2. Loosen the lock-knob (B) Fig. 18 and the tension knob (located on the

Page 5 - SAVE THESE INSTRUCTIONS

13ADJUSTING THE SPINDLE RETURN SPRINGThe spindle will automatically return slowly to its upper position when the handle is released. The spindle retur

Page 6 - GROUNDING INSTRUCTIONS

14Fig. 25ABDCNOTE: Use drill bits with a shank of 5/8" or less in diameter.DISCONNECT MACHINE FROM POWER SOURCE.1. Insert the smooth end of drill

Page 7 - EXTENSION CORDS

15MAINTENANCEPARTS, SERVICE OR WARRANTY ASSISTANCEAll Delta Machines and accessories are manufactured to high quality standards and are serviced by a

Page 8 - CARTON CONTENTS

16Two Year Limited New Product WarrantyDelta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine

Page 9 - ASSEMBLY

The following are trademarks of PORTER-CABLE •DELTA (Las siguientes son marcas registradas de PORTER-CABLE • DELTA S.A.) (Les marquessuivantes sont de

Page 10 - OPERATION

2TABLE OF CONTENTSRead and understand all warnings and operating instructions before using any tool or equipment. Whenusing tools or equipment, basic

Page 11 - TABLE ADJUSTMENTS

3Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.Indicates a potentially hazardous situation

Page 12 - DRILLING HOLES TO DEPTH

4GENERAL SAFETY RULESREAD AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFOREUSING THIS EQUIPMENT. Failure to follow all instructions listed

Page 13 - MACHINE USE

5SAVE THESE INSTRUCTIONS. Refer to them often and use them to instruct others.ADDITIONAL SPECIFIC SAFETY RULES1. DO NOT OPERATE THIS MACHINE until it

Page 14 - DRILLING WOOD

6A separate electrical circuit should be used for your machines. This circuit should not be less than #12 wire and should beprotected with a 20 Amp ti

Page 15 - TROUBLESHOOTING

You can have your drill press converted to 230 voltoperation.A qualified electrician must perform this conversion. Shouldyou desire to have your drill

Page 16 - WARRANTY

8FOREWORDFUNCTIONAL DESCRIPTIONUNPACKING AND CLEANING Carefully unpack the machine and all loose items from the shipping container(s). Remove the prot

Page 17 - • DELTA)

9ASSEMBLYASSEMBLY TOOLS REQUIREDASSEMBLY TIME ESTIMATE1. Attach the column (A) Fig. 3 to the base (B) using thefour 1-3/4" bolts (C), three of wh

Comments to this Manuals

No comments