Delta 17-965 Instruction Manual download pdf (Page 8)

FOREWORD

FUNCTIONAL DESCRIPTION

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from

all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone,

gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household

floor paste wax.

NOTICE: The photo on the manual cover illustrates the current production model. All other illustrations contained in

the manual are representative only and may not depict the actual color, labeling, or accessories, and are intended to

illustrate technique only.

CARTON CONTENTS

The Delta Model 17-965 is a 16-1/2" floor model drill press. This heavy-duty machine has a 3/4 HP, 120/240V induction

motor, 5/8" capacity chuck and key, cast iron table, rack and pinion elevation mechanism, and external depth stop. The

17-965 has a tilting table for angle drilling and side edges and parallel slots for fast workpiece clamping.

1. Drill Press Head

2. Column

3. Base

4. Table Bracket

5. Table

6. Chuck

7. Handles (3)

8. M8 x 125mm carriage head screws, flat washers,

lockwashers, and hex nuts (2 ea.)

9. Locking lever for table bracket

10. Table locking lever

11. Table Adjusting Handle

12. 3mm Hex Wrench

13. 5mm Hex Wrench

14. 7/16-14 x 1-3/4" Hex Head Screws (4)

15. Chuck Key

Fig. 1

Fig. 2

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 16 17

No comments

Delta 17-965 Instruction Manual Page 8