INSTRUCTION MANUAL8" Bench Grinder W/Lamp(Model 23-592)PART NO. 901926 (015)Copyright © 2001 Delta MachineryESPAÑOL: PÁGINA 11To learn more about
2SAFETY RULESWoodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, thereare certain hazards in
ADDITIONAL SAFETY RULES FOR GRINDERS31. DO NOT OPERATE your tool until it is completelyassembled and installed according to the instructions.2. IF YOU
4UNPACKING AND CLEANINGCarefully unpack the tool and all loose items from the carton. Remove the protective coating from all unpainted parts.This coat
5ASSEMBLYTOOL RESTS1. Assemble adjustable tool rest (A) Fig. 3, to left sideof tool rest arm (B), as shown, and fasten with one 5/16-18x3/4" hex
62. Align the holes in the eye shield with the holes in thespark guard and place the eye shield spacer (A) Fig. 7, inthe space in the spark guard as s
7EXTENSION CORDSUse proper extension cords. Make sure your extensioncord is in good condition and is a 3-wire extension cordwhich has a 3-prong ground
8STARTING ANDSTOPPING GRINDERThe switch (A) Fig. 14, is located on the front of thegrinder. To turn the grinder “ON” push the left handportion of the
9Delta Building Trades and Home Shop MachineryTwo Year Limited WarrantyDelta will repair or replace, at its expense and at its option, any Delta machi
Comments to this Manuals