Delta 23-725 Instruction Manual

INSTRUCTION MANUAL10" Grinder w/Pedestal(Model 23-735)8" Grinder w/Pedestal(Model 23-730)8" Slow Speed Grinder(Model 23-725)PART NO. 90

10Fig. 17A2. Grounded, cord-connected tools intended for use ona supply circuit having a nominal rating less than 150volts:This tool is intended for u

11STARTING ANDSTOPPING GRINDERThe “ON-OFF” switch (A) Fig. 18 is located on the frontof the grinder. To turn the grinder “ON” move the switchto the ri

12CHANGING GRINDING WHEELSCAUTION: DISCONNECT MACHINE FROMPOWER SOURCE BEFORE CHANGINGGRINDING WHEELS.1. When changing wheels, remove the three screws

13OPERATIONSIMPORTANT: KEEP SPARK GUARDS AND EYESHIELDS IN PLACE AT ALL TIMES.Figures 23, 24, and 25, illustrate several typicaloperations that can be

14PARTS, SERVICE OR WARRANTY ASSISTANCEAll Delta Machines and accessories are manufactured to high quality standards and are serviced by a networkof P

15NOTES

The following are trademarks of PORTER-CABLE DELTA Corporation (Las siguientes son marcas registradas de PORTER-CABLE S.A.):BAMMER®, INNOVATION THAT W

2SAFETY RULESWoodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, thereare certain hazards in

ADDITIONAL SAFETY RULES FORGRINDERS31. DO NOT operate your tool until it is completelyassembled and installed according to the instructions.2. IF YOU

4UNPACKING AND CLEANINGCarefully unpack the tool and all loose items from the carton. Remove the protective coating from all unpainted parts.This coat

5HARDWARE ILLUSTRATIONFig. 2 illustrates the hardware components of the grinder. ACTUAL SIZEFig. 2M10 x 1.50 x 30M8 x 1.25 x 18M8 x 1.25 x 15M8 x 1.25

6ASSEMBLY INSTRUCTIONSASSEMBLING TOOL RESTS1. The tool rest arms (F) Fig. 3, are universal and canbe attached to either side of the grinder. Assemblea

7Fig. 6Fig. 7DCCDFig. 9AAFig. 8BASSEMBLING EYE SHIELDSYour grinder is supplied with two eye shields for operator protection. NOTE: ALWAYS WEAR EYE PRO

8ASSEMBLING PEDESTAL (MODELS 23-730 & 23-735)NOTE: Pedestal hardware is illustrated ACTUAL SIZEFig. 10. 1. Stand the column up with the square end

9Use proper extension cords. Make sure your extensioncord is in good condition and is a 3-wire extension cordwhich has a 3-prong grounding type plug a