Delta 23-725 Instruction Manual

INSTRUCTION MANUAL8" Slow Speed Grinder(Model 23-725)PART NO. 900804 - 06-10-05Copyright © 2005 Delta MachineryTo learn more about DELTA MACHINER

10ASSEMBLING TOOL RESTSDISCONNECT MACHINE FROM POWERSOURCE.1. The tool rest arms (F) Fig. 3, are universal and canbe attached to either side of the gr

11Fig. 6Fig. 7DCCDFig. 9AAFig. 8BASSEMBLING EYE SHIELDSDISCONNECT MACHINE FROM POWER SOURCE.Your grinder is supplied with two eye shields for operator

12Fig. 17AFLEXIBLE LAMPThe flexible lamp operates independently of the grinder.To turn the lamp on and off, rotate switch (A) Fig. 17. To reduce the r

13DRESSING A GRINDING WHEELWhen dressing a grinding wheel, use a suitable siliconecarbide stick type dresser or the wheel dresser wrenchprovided with

IMPORTANT: KEEP SPARK GUARDS AND EYESHIELDS IN PLACE AT ALL TIMES.Figures 23, 24, and 25, illustrate several typicaloperations that can be accomplishe

15TROUBLESHOOTINGFor assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or callthe DELTA Machiner

16Two Year Limited New Product WarrantyDelta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine

17NOTES

18NOTES

19NOTES

2TABLE OF CONTENTSRead and understand all warnings and operating instructions before using any tool or equipment. Whenusing tools or equipment, basic

The following are trademarks of PORTER-CABLE •DELTA (Las siguientes son marcas registradas de PORTER-CABLE • DELTA S.A.) (Les marquessuivantes sont de

3Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.Indicates a potentially hazardous situation

4GENERAL SAFETY RULESREAD AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFOREUSING THIS EQUIPMENT. Failure to follow all instructions listed

5FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY.ADDITIONAL SPECIFIC SAFETY RULESSAVE THESE INSTRUCTIONS. Refer to them often and

6Fig. A Fig. BGROUNDED OUTLET BOXCURRENTCARRYINGPRONGSGROUNDING BLADEIS LONGEST OF THE 3 BLADESGROUNDED OUTLET BOXGROUNDINGMEANSADAPTERPOWER CONNECTIO

7Fig. D-1MINIMUM GAUGE EXTENSION CORDRECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINESAmpere Total Length Gauge ofRating Volts of Cord in Fe

8Fig. 1A Grinder and Lamp (1)B Water Tray (1)C Eye Shield (2)D Eye Shield Rod (2)E Eye Shield Rod Bracket (2)F Tool Rest Arm (2)G Wrench (1)H Wheel Dr

9HARDWARE ILLUSTRATIONFig. 2 illustrates the hardware components of the grinder. ACTUAL SIZEFig. 2M10 x 1.50 x 30M8 x 1.25 x 18M8 x 1.25 x 15M8 x 1.25