INSTRUCTION MANUALUtility Sharpener(Model GR050)PART NO. 906996 - 08-06-02Copyright © 2002 Delta MachineryESPAÑOL: PÁGINA 11To learn more about DELTA
10Two Year Limited WarrantyDelta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory which
2GENERAL SAFETY RULESWoodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, thereare certain ha
ADDITIONAL SAFETY RULES FORUTILITY SHARPENERS3WARNING: FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY.SAVE THESE INSTRUCTIONS. Re
4POWER CONNECTIONSGROUND FAULT CIRCUIT INTERRUPTER (GFCI) PROTECTION SHOULD BE PROVIDED ON THE CIRCUIT(S) OROUTLET(S) TO BE USED FOR THE UTILITY SHARP
Use proper extension cords. Make sure your extension cord is in good condition and is a 3-wire extension cord whichhas a 3-prong grounding type plug a
6UTILITY SHARPENER COMPONENTSFig. 212345671. Forward / Off / Reverse Control Switch2. Front Tool Rest3. Front Tool Rest Adjusting Screws4. Hex Wrench5
7FILLING UTILITY SHARPENER WITH WATER1. WARNING: DISCONNECT MACHINE FROMPOWER SOURCE.2. Place the utility sharpener on a flat surface.3. Loosen the th
8OPERATING CONTROLS AND ADJUSTMENTSSTARTING AND STOPPINGUTILITY SHARPENERThe “Forward / Off / Reverse” switch (A) Fig. 6, is locatedtoward the front o
9NOTES
Comments to this Manuals