Delta DVP-ES2 User Manual Page 261

  • Download
  • Add to my manuals
  • Print
  • Page
    / 702
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 260
3. Instruction Set
3-145
API Mnemonic Operands Function
59
D PLSR
Pulse Ramp
Controllers
ES2/EX2 SS2 SA2
SE
SX2
Bit Devices Word devices Program Steps Type
OP
X Y M S K H KnX KnY KnM KnS T C D E F
S
1
* ** * * * * * ***
S
2
* ** * * * * * ***
S
3
* ** * * * * * ***
D *
PLSR: 9 steps
DPLSR: 17 steps
PULSE 16-bit 32-bit
ES2/EX2 SS2
SA2
SE
SX2 ES2/EX2 SS2
SA2
SE
SX2 ES2/EX2 SS2
SA2
SE
SX2
Operands:
S
1
: Maximum frequency (Hz) S
2
: Number of pulses S
3
: Ramp up/down time (ms)
D: Pulse output device (Y0, Y1, Y2 and Y3 are available) (DVP-SE does not support Y1 and Y3.)
Explanations:
52. PLSR instruction performs a frequency ramp up/down process when positioning. Speed ramp
up process is activated between static status to the target speed. Pulse output persists in
target speed before getting close to target position. When target position is near, speed ramp
down process executes, and pulse output stops when target position is achieved.
53. Set range of S
1
pulse output frequency:
Range of S
1
pulse output frequency:
Output Y0, Y2 Y1, Y3
16-bit
SS2: 6~10,000Hz
ES2/EX2/SA2/SX2/SE: 6~32,767Hz
6~10,000Hz
Output
frequency:
32-bit
SS2: 6~10,000Hz
ES2/EX2/SA2/SX2/SE: 0~100,000Hz
6~10,000Hz
If frequency smaller than 6Hz is specified, PLC will output 6Hz.
If frequency bigger than max frequency is specified, PLC will output with max frequency.
54. When output device is specified with Y0, Y2, the start/end frequency of Y0 is set by D1340 and
start/end frequency of Y2 is set by D1352.
55. When output device is specified with Y1, Y3, the start/end frequency is 0Hz.
56. When D1220/D1221 = K1 or K2, positive/negative sign of S
2
denotes pulse output direction.
57. PLSR instruction supports two modes of pulse output as below list.
D1220 D1221
Mode
Output
K0 K1 K0 K1
Y0 Pulse Pulse
Y1 Pulse Dir
Y2 Pulse Pulse
Page view 260
1 2 ... 256 257 258 259 260 261 262 263 264 265 266 ... 701 702

Comments to this Manuals

No comments