Delta DVP-ES2 User Manual download pdf (Page 451)

100

101

3. Instruction Set

3-335

D1260 Low 00 H

D1261 Low 10 H

Number of Data (count by word)

D1262 Low 79 H CRC CHK Low

D1263 Low 0A H CRC CHK High

Registers for received data (responding messages)

D0 1234 H PLC stores the value 1234H into D1296

D1 Low 02 H Function

D2 Low 02 H Number of Data (Byte)

D3 Low 34 H

D4 Low 12 H

Content of address

H0500~H0515

D5 Low 2F H CRC CHK Low

D6 Low 75 H CRC CHK High

Analysis of the read status of PLC2 Y0~Y17: 1234H

Device Status Device Status Device Status Device Status

Y0 OFF Y1 OFF Y2 ON Y3 OFF

Y4 ON Y5 ON Y6 OFF Y7 OFF

Y10 OFF Y11 ON Y12 OFF Y13 OFF

Y14 ON Y15 OFF Y16 OFF Y17 OFF

Program Example 2: COM1(RS-232) / COM3(RS-485), Function Code H02

1. Function code K2 (H02): read multiple bit devices. Up to 64 bits can be read.

2. PLC1 connects to PLC2: (M1320 = OFF, ASCII mode), (M1320 = ON, RTU mode)

3. For both ASCII and RTU modes, PLC COM1/COM3 only stores the received data in registers

starting from S, and will not store the data to be sent. The stored data can be transformed and

moved by using DTM instruction for applications of other purposes.

4. Take the connection between PLC1 (PLC COM3) and PLC2(PLC COM1) for example, the

tables below explains the status when PLC1 reads Y0~Y17 of PLC2

z If PLC1 applies COM1 for communication, the below program can be usable by

changing:

1. D1109→D1036: communication protocol

2. M1136→M1138: retain communication setting

3. D1252→D1249: Set value for data receiving timeout

4. M1320→M1139: ASCII/RTU mode selection

5. M1316→M1312: sending request

6. M1318→M1314: receiving completed flag

1 2 ... 446 447 448 449 450 451 452 453 454 455 456 ... 701 702

Delta DVP-ES2 User Manual Page 451

Comments to this Manuals