Delta DVP-ES2 User Manual download pdf (Page 93)

100

101

2. Programming Concepts

DABSR:

1. M1029= ON when instruction is completed.

2. When the instruction is re-executed for the next time, M1029 will turn off first then ON again

when the instruction is completed

ZRN, DRVI, DRVA:

1. M1029 will be “ON” after Y0 and Y1 pulse output is completed. M1102 will be “ON” after Y2

and Y3 pulse output is compeleted.

2. When the instruction is re-executed for the next time, M1029 / M1102 will turn off first then

ON again when the instruction is completed.

Clear Instruction

Function Group

M1031, M1032

Number

Contents:

M1031 (clear non-latched memory) , M1032 (clear latched memory)

Device Devices will be cleared

M1031

Contact status of Y, general-purpose M and general-purpose S

 General-purpose contact and timing coil of T

Clear non-latched area

 General-purpose contact, counting coil reset coil of C

 General-purpose present value register of D

 General-purpose present value register of T

 General-purpose present value register of C

M1032

Contact status of M and S for latched

Clear latched area

 Contact and timing coil of accumulative timer T

 Contact and timing coil of high-speed counter C for latched

 Present value register of D for latched

 Present value register of accumulative timer T

 Present value register of high-speed counter C for latched

Output State Latched in STOP mode

Function Group

M1033

Number

Contents:

When M1033 = ON, PLC outputs will be latched when PLC is switched from RUN to STOP.

Disabling all Y outputs

Function Group

M1034

Number

Contents:

When M1034 = ON, all outputs will turn off.

2-61

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 701 702

Delta DVP-ES2 User Manual Page 93

Comments to this Manuals