Delta AH500 series Manual Page 103

  • Download
  • Add to my manuals
  • Print
  • Page
    / 297
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 102
AH500 Hardware Manual
3-59
AH10DNET-5A
IN 1
IN 0
DR 1
DR 0
10DNET
Node Address
x10
0
x10
1
NS
MS
1
12
2
3
4
7
6
8
9
11
10
5
Number Name Description
1 Model name Model name of the module
2
Seven-segment
display
Display
3 Address knobs Setting the address
4 Function switch Setting the functions
5 DeviceNet connector DeviceNet is used to interconnect control devices for data exchange.
6 MS LED indicator Indicating the status of the module
7 NS LED indicator Indicating the status of the network
8
Removable terminal
block
Terminals for wiring
9 Label Nameplate
10 Set screw Fixing the module
11 Connector Connecting the module and a backplane.
12 Projection Fixing the module
1. Address knobs
It is used to set the node address of AH10DNET-5A on a DeviceNet network. (Node addresses range
from 0 to 63.)
Setting Description
0…63
Available nodes on a DeviceNet
network
64…99
Unavailable nodes on a
DeviceNet network
Example: If users want to set the communication address of AH10DNET-5A to 26, they can turn the
knob corresponding to x10
1
to 2, and turn the knob corresponding to x10
0
to 6.
Points for attention:
When the power supply is cut off, the node address is set. After the setting of the node address is
complete, AH10DNET-5A can be supplied with power.
If AH10DNET-5A is running, changing the node address is unavailable.
Please use a slotted screwdriver to turn the knobs with care, and do not scrape them.
Page view 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 296 297

Comments to this Manuals

No comments