Delta AH500 series Manual Page 156

  • Download
  • Add to my manuals
  • Print
  • Page
    / 297
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 155
AH500 Hardware Manual
4.3.3 Start Addresses for Temperature Measurement Modules
Users can assign input registers to a temperature measurement module through HWCONFIG in ISPSoft. The
input registers should be in the range of D0 to D65535. Take AH08TC-5A for instance. The original input
registers are D0~D15. Users can change the input device range from D0~D15 to D60~D75.
Default input device range: D0~D15
User-defined input device range: D60~D75
4.3.4 Start Addresses for Motion Control Modules
Users can assign input registers and output registers to a motion control module through HWCONFIG in
ISPSoft. The input registers should be in the range of D0 to D65535, and the output registers should be in the
range of D0 to D65535. Take AH04HC-5A for instance. The original input registers are D0~D27. Users can
change the input device range from D0~D27 to D200~D227.
Default input device range: D0~D27
User-defined input device range: D200~D227
4-8
Page view 155
1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 296 297

Comments to this Manuals

No comments