Delta AH500 series Manual Page 270

  • Download
  • Add to my manuals
  • Print
  • Page
    / 297
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 269
AH500 Hardware Manual
9-6
Error
code
Description Remedy
16#2010
1. The instruction does not
support the device.
2. Encoding error
3. The instruction is a 16-bit
instruction, but the constant
operand is a 32-bit code.
(SM5)
Check the program, compile the program again, and
download the program again.
16#2011
The number of operands is
incorrect. (SM5)
Check the program, compile the program again, and
download the program again.
16#2012
Incorrect division operation
(SM0/SM5).
Check the program, compile the program again, and
download the program again.
16#2013
The value exceeds the range of
values which can be represented
by the floating-point numbers.
(SM0/SM5)
Check the program, compile the program again, and
download the program again.
16#2014
The task designated by
TKON/YKOFF is incorrect, or
exceeds the range. (SM5)
Check the program, compile the program again, and
download the program again.
16#2015
There are more than 32 levels of
nested program structures
supported by CALL. (SM0)
Check the program, compile the program again, and
download the program again.
16#2016
There are more than 32 levels of
nested program structures
supported by FOR/NEXT.
(SM0/SM5)
Check the program, compile the program again, and
download the program again.
16#2017
The number of times FOR is
used is different from the number
of times NEXT is used. (SM5)
Check the program, compile the program again, and
download the program again.
16#2018
There is a label after FEND, but
there is no SRET.
There is SRET, but there is no
label. (SM5)
1. Compile the program again, and download the
program again.
2. Reinstall ISPSoft, compile the program again, and
download the program again.
16#2019
The interrupt task is not after
FEND. (SM5)
1. Compile the program again, and download the
program again.
2. Reinstall ISPSoft, compile the program again, and
download the program again.
16#201A
IRET/SRET is not after FEND.
(SM5)
1. Compile the program again, and download the
program again.
2. Reinstall ISPSoft, compile the program again, and
download the program again.
16#201B
There is an interrupt task, but
there is no IRET.
There is IRET, but there is not
interrupt task. (SM5)
1. Compile the program again, and download the
program again.
2. Reinstall ISPSoft, compile the program again, and
download the program again.
16#201C
End is not at the end of the
program. (SM5)
1. Compile the program again, and download the
program again.
2. Reinstall ISPSoft, compile the program again, and
download the program again.
16#201D
There is CALL, but there is no
MAR. (SM5)
1. Compile the program again, and download the
program again.
2. Reinstall ISPSoft, compile the program again, and
download the program again.
Page view 269
1 2 ... 265 266 267 268 269 270 271 272 273 274 275 ... 296 297

Comments to this Manuals

No comments