AH500 Hardware Manual
9-22
Error
code
Description Remedy
16#A002
The signal received by channel 2
exceeds the range of inputs
which can be received by the
hardware. (The ERROR LED
indicator blinks.)
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 2 exceeds
the range of inputs which can be received by the
hardware.
16#A003
The signal received by channel 3
exceeds the range of inputs
which can be received by the
hardware. (The ERROR LED
indicator blinks.)
Check the module parameter in HWCONFIG.
Check whether The signal received by channel 3
exceeds the range of inputs which can be received by the
hardware.
16#A004
The signal received by channel 4
exceeds the range of inputs
which can be received by the
hardware. (The ERROR LED
indicator blinks.)
Check the module parameter in HWCONFIG.
Check whether The signal received by channel 4
exceeds the range of inputs which can be received by the
hardware.
16#A005
The signal received by channel 5
exceeds the range of inputs
which can be received by the
hardware. (The ERROR LED
indicator blinks.)
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 5 exceeds
the range of inputs which can be received by the
hardware.
16#A006
The signal received by channel 6
exceeds the range of inputs
which can be received by the
hardware. (The ERROR LED
indicator blinks.)
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 6 exceeds
the range of inputs which can be received by the
hardware.
16#A007
The signal received by channel 7
exceeds the range of inputs
which can be received by the
hardware. (The ERROR LED
indicator blinks.)
Check the module parameter in HWCONFIG.
Check whether the input signal in channel 7 exceeds the
specifications.
16#A400
The signal received by channel 0
exceeds the range of inputs
which can be received by the
hardware. (The ERROR LED
indicator is ON.)
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 0 exceeds
the range of inputs which can be received by the
hardware.
16#A401
The signal received by channel 1
exceeds the range of inputs
which can be received by the
hardware. (The ERROR LED
indicator is ON.)
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 1 exceeds
the range of inputs which can be received by the
hardware.
16#A402
The signal received by channel 2
exceeds the range of inputs
which can be received by the
hardware. (The ERROR LED
indicator is ON.)
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 2 exceeds
the range of inputs which can be received by the
hardware.
16#A403
The signal received by channel 3
exceeds the range of inputs
which can be received by the
hardware. (The ERROR LED
indicator is ON.)
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 3 exceeds
the range of inputs which can be received by the
hardware.
Comments to this Manuals