Delta AH500 series Manual Page 99

  • Download
  • Add to my manuals
  • Print
  • Page
    / 297
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 98
AH500 Hardware Manual
Item Specifications
Communication cable
The Delta standard cables TAP-CB01 and TAP-CB02 are recommended.
The communication cable should be away from the power cable and the
shielded cable should be connected to the ground.
Voltage
DeviceNet network provides 11~25 V direct current. e.g. 28 mA (Typical value),
125 mA impulse current (24 V DC).
DeviceNet Communication
Item Specifications
Master mode: Supporting explicit messages, and all kinds of I/O connections
with the slave such as I/O polled connections, bit-strobed
connections, state changing connections, and cyclic connections
Message type
Slave mode: Supporting explicit messages and a group 2 only server
Transmission speed
Standard: 125 kbps, 250 kbps and 500 kbps
Extension: 10 kbps, 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 800 kbps
and 1 Mbps
AH10PFBM-5A
AH500 series CPU module supported
Item Specifications
Model name AH500 series PLCs
PROFIBUS-DP interface
Item Specifications
Interface DB9 connector
Transmission
method
High-speed RS-485
Transmission cable Two-wire twisted shielded cable
Electrical isolation 500 V DC
PROFIBUS-DP communication
Item Specifications
Message type Cyclic data exchange
Module name AH10PFBM-5A
Product ID 0B49
Serial transmission
speed supported
(auto-detection)
9.6 kbps; 19.2 kbps; 31.25 kpbs;45.45 kbps;93.75 kbps; 187.5 kbps; 500 kbps;
1.5 Mbps; 3 Mbps; 6 Mbps; 12 Mbps
Electrical specification
Item Specifications
Power supply
voltage
5 V DC
Insulation voltage 500 V DC
Power consumption 2 W
Weight 190 g
AH10PFBS-5A
PROFIBUS-DP port
Interface DB9 connector
Transmission
method
High-speed RS-485
Transmission cable Shielded twisted pair cable
Electrical isolation 500 V DC
3-55
Page view 98
1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 296 297

Comments to this Manuals

No comments