Delta 18-900L Use and Care Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 68
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
21
To reduce the risk of injury, turn unit off and disconnect it from power source before installing and
removing accessories, before adjusting or when making repairs. An accidental start-up can cause injury.
KEEP MACHINE CLEAN
Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth.
NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.
Wear certied safety equipment for eye, hearing and respiratory protection while using compressed air
FAILURE TO START
Should your machine fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet.
Also, check for blown fuses or open circuit breakers in the line.
LUBRICATION & RUST PROTECTION
Applyhouseholdoorpastewaxtothemachinetable,extensiontableorotherworksurfaceweekly.Oruseacommercially
availableprotectiveproductdesignedforthispurpose.Followthemanufacturer’sinstructionsforuseandsafety.
To clean cast iron tables of rust, you will need the following materials: a medium sized scouring pad, a can of spray
lubricant and a can of degreaser. Apply the spray lubricant and polish the table surface with the scouring pad. Degrease
the table, then apply the protective product as described above.
TROUBLESHOOTING
Forassistancewithyourmachine,visitourwebsiteatwww.DeltaMachinery.com for a list of service centers or call the
DELTA®PowerEquipmentCorporationhelplineat1-800-223-7278.
MAINTENANCE
INSPECT THE BELTS
Occassionally inspect the belts for wear and replace as
needed.
INSPECT THE BOLTS
Occassionallyremovetheknuckleclampbolt (K)Fig.49
andtableclampingbolt(T)Fig.50andcleanoffalldust
and other contamination. Also, be sure to clean any dust
orcontaminationfromthe holeusing a smallbrush(like
anoldtoothbrush).
Fig. 49
Fig. 50
K
T
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 67 68

Comments to this Manuals

No comments