Delta 140-SS-DST Installation Guide

SINGLE HANDLE KITCHEN FAUCETLLAVE DE COCINA DE PALANCAROBINET DE CUISINE À UNE MANETTE1®UPCModels/Modelos/Modèles100-DST, 101-DST, 117-DST, 119-DST, 1

4211064283 Rev. A4A. Remove aerator (1) and turn faucet handle (2) to the full on mixed position. (Some models require wrench (3) to remove aerat

1164283 Rev. ARP63263Adapters 3/8"-24 UNEF to 1/2"-20 UN &3/8"-24 UNEF to 1/2"-14 NPSMAdaptadors 3/8”-24 UNEF a 1/2”-20 UN &

1264283 Rev. ARP44771▲Handle w/Button & Set ScrewManija con Botón y Tornillo de AjusteManette avec Bouton et Vis de CalageRP152▲Set Screw

264283 Rev. AToutes les pièces et les finis du robinet Delta® sont protégés contre les défectuosités de matériau et les vices de fabrication par une g

134MaintenanceIf faucet exhibits very low flow: A. Remove and clean aerator (1) (Some models require wrench (2) to remove aerator), orB. SHUT OFF W

SHUT OFF WATER SUPPLIES. Remove old faucet. Slide gasket (1) over tubes (2) and install onto bottom of faucet. NOTE: If surface is uneven, use silicon

564283 Rev. AMount the spray support (1) in far right hole in sink. Hand tighten nut (2). Insert sprayer and hose (3) down through support assembly.

SHUT OFF WATER SUPPLIES. Remove old faucet. Make sure gasket and base (1) are properly positioned under new faucet. Feed tubes and shank (2) down thro

764283 Rev. A2123A. Pull on clip (1) until disengaged. Pull down on diverter plug (2) to remove. Discard diverter plug. Caution: Do not remove tu

3A. Conexiones a la Línea de Agua Asegúrese que todos los accesorios y las conexiones finales estén libres de residuos. Los accesorios (1) son de co

Custom Fit Connections - Plastic Sleeve Installation Instructions 1. Identify desired length of tube (1). Leave 1" - 2" of extra length to a