Delta MMC120 User Manual Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 150
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
26
event step table to the FLASH.
Stored Commands
Each of these buttons issues a stored
command to the current axis. This is
equivalent to holding CTRL and pressing a
number key. Also, if the user holds down
the ALT key while pressing one of these
buttons, the full profile stored command is
executed. This is equivalent to holding
ALT and pressing a number key. See Using
Stored Commands for further details.
Current Axis
On the main screen window, there is always one field that is highlighted. The axis that
this selected field is under is the current axis.
Basic Topics
Changing Data from the Keyboard
The data in the COMMANDS, PLOT TIME and PARAMETER sections may be
changed from the keyboard. Additionally the data in any of the table editors can be
modified from the keyboard.
To enter values from the keyboard you must first select one or more cells. Selected cells
are highlighted.
To select a single cell from the keyboard:
1. Use the arrow keys to move the selected cell around.
To select multiple cells.
1. Press and hold SHIFT at the first cell to be selected.
2. Use the arrow keys to change the last cell to be selected.
3. Release SHIFT.
Onceoneormorecellsareselected,simplytypeinthevalueyouwantusingoneofthe
following formats:
To enter decimal numbers, simply type in the value, without a leading zero.
To enter hexadecimal numbers, type a leading zero, followed by the hexadecimal
digits. For example, 0FFE0.
To enter an ASCII command, type the letter of the command. Notice that this works
Page view 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 149 150

Comments to this Manuals

No comments