Delta MMC120 User Manual Page 52

  • Download
  • Add to my manuals
  • Print
  • Page
    / 105
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 51
Communicating with the MMC120 MMC120 Linear Motion Control Module
52 Delta Computer Systems, Inc. 360/254-8688
Command Type 2 - Set Profiles (0000 XXXX 0010 NNNN)
These commands allow the programmer to change motion profiles stored in the MMC120. Only one value in
one profile can be changed each time the drop is accessed, but the profiles can be changed while the axis is
moving. The new profile will be used by the next Go Using Profile command specifying that profile. New GO
commands can also be given while the axis is moving.
BIT #
| | 111|1111
1234|5678|9012|3456
------------------- 4TTTTT+0 4TTTTT+2
HEX |SAR |CMND|INDX Axis 1 Axis 2
VALUE -------------------
0X20 0000|XXXX|0010|0000 - SET PROFILE 0 4 MODE
0X21 0000|XXXX|0010|0001 - SET PROFILE 0 4 ACCEL
0X22 0000|XXXX|0010|0010 - SET PROFILE 0 4 DECEL
0X23 0000|XXXX|0010|0011 - SET PROFILE 0 4 SPEED
0X24 0000|XXXX|0010|0100 - SET PROFILE 1 5 MODE
0X25 0000|XXXX|0010|0101 - SET PROFILE 1 5 ACCEL
0X26 0000|XXXX|0010|0110 - SET PROFILE 1 5 DECEL
0X27 0000|XXXX|0010|0111 - SET PROFILE 1 5 SPEED
0X28 0000|XXXX|0010|1000 - SET PROFILE 2 6 MODE
0X29 0000|XXXX|0010|1001 - SET PROFILE 2 6 ACCEL
0X2A 0000|XXXX|0010|1010 - SET PROFILE 2 6 DECEL
0X2B 0000|XXXX|0010|1011 - SET PROFILE 2 6 SPEED
0X2C 0000|XXXX|0010|1100 - SET PROFILE 3 7 MODE
0X2D 0000|XXXX|0010|1101 - SET PROFILE 3 7 ACCEL
0X2E 0000|XXXX|0010|1110 - SET PROFILE 3 7 DECEL
0X2F 0000|XXXX|0010|1111 - SET PROFILE 3 7 SPEED
Setting one complete profile requires four scans with one command written each scan.
Example: Set profiles 2 and 7
Commands to axis 1 set profile 2 while commands to axis 2 set profile 7, so these two profiles can be set
simultaneously.
First Scan 4TTTTT + 0 0X28h (Set profile 2 MODE)
+ 1 0001h (MODE for profile 2)
+ 2 0X2Ch (Set profile 7 MODE)
+ 3 0001h (MODE for profile 7)
Second Scan 4TTTTT + 0 0X29h (Set profile 2 ACCEL)
+ 1 100 (ACCEL for profile 2)
+ 2 0X2Dh (Set profile 7 ACCEL)
+ 3 150 (ACCEL for profile 7)
Third Scan 4TTTTT + 0 0X2Ah (Set profile 2 DECEL)
+ 1 70 (DECEL for profile 2)
+ 2 0X2Eh (Set profile 7 DECEL)
+ 3 70 (DECEL for profile 7)
Page view 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 104 105

Comments to this Manuals

No comments