Delta RMC101 User Manual download pdf (Page 101)

100

101

Table Editors 3.6

Using RMCWin 3-51

Saving and Restoring Tables

To save a table:

1. On the File menu, click Save As.

2. In the File name box, enter the name of the file.

3. Click Save. The file will be saved in text format.

To restore a table:

1. On the File menu, click Open.

2. In the File name box, enter the name of the file.

3. Click Open.

Uploading and Downloading Tables

Except the Stored Command table, all tables are stored on the RMC. The RMC will only use the

tables stored in its memory. Therefore, the tables must be uploaded and downloaded to work on

them in the table editors. If an RMC is connected to RMCWin, then the table will be uploaded

when the table editor is opened.

To download a table to the Module, use one of these methods:

• On the Online menu, click Download to Motion Controller.

• Click Download to Module (

) from the toolbar.

To upload a table from the Module, use one of these methods:

• On the Online menu, click Upload from Motion Controller.

• Click Upload from Module (

) from the toolbar.

3.6.2 Editing the Input to Event Table

Input to Events Explained

Depending on the communication hardware used with the RMC module, between zero and

sixteen digital inputs can be used to trigger events (start executing steps). Refer to the following

table to determine which inputs can be used with the Input-to-Event feature:

Communication Type Without Sensor DI/O With Sensor DI/O

Comm. DI/O in Input-

Comm DI/O inputs 0-15

Same as without Sensor

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 950 951

Comments to this Manuals

No comments

Delta RMC101 User Manual Page 101

Comments to this Manuals

Related products and manuals for Sensors Delta RMC101