Delta RMC101 User Manual download pdf (Page 129)

100

101

LCD Screen Editor 3.8

Using RMCWin 3-79

2. In the Write Locations list, select the write location you wish to remove.

3. Under Write Locations, click Remove.

This command will be unavailable if you only have one write location left. You must keep at least

one write location.

To edit a write location:

1. Open the Edit Write Locations dialog box as described above.

2. In the Write Locations list, select the write location you wish to remove.

3. Under Location Detail, change the settings for this write location. See Data Tab Details for

additional information on setting up these fields.

To check the write location limits:

1. Open the Edit Write Locations dialog box as described above.

2. You will find the three numerical limits in the following locations. Each limit takes the form "n of m

(p)," where n is the number currently used, m is the maximum number allowed, and p is the

percentage of the maximum currently used:

• Total multi-location fields.

Under Multi-Location Memory, look at Total Fields Used.

• Total write locations in multi-location fields.

Under Multi-Location Memory, look at Total Locations Used.

• Write locations for this field.

Look at the Write Locations list heading.

To complete changes to the write location list:

1. Click OK.

2. If you changed the first write location in the list, you will be prompted to confirm that you want to

change the Data to Display area of the field pane's Data tab. This is necessary because it is

neither possible nor desirable to have the value displayed for a field not correlate to the value that

is edited. Click Yes to accept your write-location-list edits and change the Data to Display area

to match the first write location. Click No to return to the Edit Write Locations dialog box.

Comments to this Manuals

No comments

Delta RMC101 User Manual Page 129

Comments to this Manuals

Related products and manuals for Sensors Delta RMC101