Delta RMC101 User Manual download pdf (Page 154)

RMC100 and RMCWin User Manual

3-104

Note: When copying the Interval Type property, a 0 is copied for "Cubic" and a 1 is copied for

"Linear". This only appears when pasting to an external application.

See Also: Curve Tool Topics

3.9.5.6 Curve Tool: Pasting Cells

Values copied to the clipboard either from the spreadsheet or from external programs can be

pasted into the spreadsheet. The values must be valid for the curve selected and for the

properties being pasted into. Values can be pasted into individual cells or into selection ranges. If

the dimensions of the values to be pasted do not match the selection range, a warning message

will be displayed. To paste the values regardless of the dimensions select a single cell as the

starting point of the paste.

To paste values into the Spreadsheet:

1. Copy the values to be pasted; see Cutting and Copying Cells for more information.

2. Select the cell(s) to receive the values copied; see Selecting Cells for more information.

3. On the Edit menu, click Paste.

If the paste command is not available, then the selection is not valid for pasting or there is no data

in the clipboard to be pasted. Try changing the selection and repeating the steps above.

If the dimensions of the data in the clipboard and the selection in the spreadsheet will require

additional points to be added, then the values will be pasted into the Insertion Point—see The

Insertion Point for more information—otherwise the values will be overwritten; see Editing Cells

for more details.

Note: When pasting the Interval Type property, a 0 is used for "Cubic" and a 1 is used for

"Linear". This is only used when pasting from an external application.

See Also: Curve Tool Topics

3.9.5.7 Curve Tool: The Insertion Point

The Spreadsheet view always shows one more row or column than there are points in the Graph

view. This is called the "Insertion Point." This column allows for new points to be entered through

the spreadsheet. Since at a minimum a point must have a time, or master position, and a position

value, these properties must be entered before a point is actually added to the curve.

Note: The time, or master position, value determines where in the curve the point will be placed.

To insert a point between two existing points, enter a time value which falls between the two

existing points' time values. For example, if there is a point at 100 and a point at 300, adding a

point at time value 200 will insert the point at that location on the curve.

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 950 951

Comments to this Manuals

No comments