Delta RMC101 User Manual download pdf (Page 408)

100

101

RMC100 and RMCWin User Manual

5-158

N159:255

N160:0-

N183:255

Plot data for axis 4

N184:0-

N207:255

Plot data for axis 5

N208:0-

N231:255

Plot data for axis 6

N232:0-

N255:255

Plot data for axis 7

5.2.6.7 Siemens Simatic TI505

5.2.6.7.1 Using the Siemens Simatic TI505 with the RMC Ethernet Module

The TI505 does not have built-in Ethernet TCP/IP support. However, Control Technology, Inc.

sells a module called the CTI 2572 that fits into the TI505 backplane and adds Ethernet TCP/IP to

the TI505.

When using this module, the CTI uses a combination of V-memory registers, and I/O registers

(WX and WY) on the CTI 2572 itself to communicate from the TI505 ladder logic. It is beyond the

scope of this manual to fully describe using the CTI 2572; please refer to the CTI 2572 Ethernet

TCP/IP Adapter Installation and Operation Guide (Part #062-00146) that is shipped with the CTI

2572.

The CTI 2572 can read, write, or do a combined read and write from registers in compatible

remote devices such as other TI505 PLCs with the CTI 2572 module or the RMC. The RMC has

65536 registers that are accessible from the CTI 2572. See RMC Register Map (Siemens TI505)

for details on those registers and their addresses.

If you need help setting up your network, either consult your network administrator, or for simple

stand-alone networks, see Setting up a Stand-alone TCP/IP Control Network.

5.2.6.7.2 RMC Register Map (Siemens TI505)

Tip: RMCWin's Address Tool provides an easy way to identify addresses in the RMC. Simply open the

Address Tool and then move the cursor to any field in RMCWin that represents an RMC Register, and

the Address Tool will display the address in the address format of your choice. See Address Tool for

details.

The RMC module has 64K (65536) 16-bit registers that can be read from or written to over

Ethernet, Modbus Plus, and PROFIBUS-DP. Each register is assigned an address. However,

under the different communication methods, different addressing schemes are used. This topic

describes the addressing from a TI505 using the CTI 2572 Ethernet TCP/IP module. For details

on addressing from other modules refer to the following topics:

• RMC Register Map (Allen-Bradley)

• RMC Register Map (Automationdirect.com)

1 2 ... 403 404 405 406 407 408 409 410 411 412 413 ... 950 951

Comments to this Manuals

No comments

Delta RMC101 User Manual Page 408

Comments to this Manuals

Related products and manuals for Sensors Delta RMC101