Delta RMC101 User Manual download pdf (Page 547)

100

101

Analog 6.1

Transducer Interface Modules 6-3

Analog Input Ranges

See the COUNTS topic for detailed information on the maximum and minimum limits of the

various analog input ranges.

See also:

General Wiring Information

Analog Transducer Overview

Analog Transducer Configuration

Using Analog Channels as Position Inputs

Using Analog Channels as Velocity Inputs

Using Analog Channels as Pressure Inputs

Using Analog Channels as Differential Force Inputs

6.1.3 Analog Transducer Configuration

There are two parts to configuring an analog transducer:

1. Select the mode of operation of each analog channel

2. Select the analog transducer type (input Voltage or current range)

Each is described in this topic.

Select the Analog Channels Modes of Operation

The Analog Board Configuration dialog is used to select the mode of operation for each analog

channel. To display this dialog:

1. On the Tools menu, click Module Configuration.

2. In the Slots list, click an analog module.

3. Click Slot options.

Many channel assignment options will be offered. Depending on the hardware and firmware

present, some of the options may be disabled. See the descriptions below for a description of

each operational mode and its possible uses.

To change the analog channel usage:

1. Click the Channels 0-1 tab.

2. Click the option button for your desired use for these channels.

3. Click the Channels 2-3 tab.

4. Click the option button for your desired use for these channels.

1 2 ... 542 543 544 545 546 547 548 549 550 551 552 ... 950 951

Comments to this Manuals

No comments

Delta RMC101 User Manual Page 547

Comments to this Manuals

Related products and manuals for Sensors Delta RMC101