Delta RMC101 User Manual download pdf (Page 65)

RMC100 Startup Appendix C: An Example

deltamotion.com

− The position lags during the constant speed portion of the move, which

the next step will address.

• Make a fairly long move without any oscillations. Issue a Feed Forward

Adjust (F) command. The Retract Feed Forward value is automatically

updated to 84 in this case.

• Make a move in the opposite direction. Issue a Feed Forward Adjust (F)

command. The Extend Feed Forward value is automatically updated to 84

in this case.

• Make a move. The axis should track much better now:

− The Sum Error

decreased from 27 million to 204,000!

• The next step is the integral gain. Gradually increase it as long as it does

not adversely affect the system. Generally, the Integral gain does not need

to be extremely high. In this example, 150 was deemed enough. The plot

(not shown) did not change much from the previous one. This does not

mean the integral gain won't help! It is important for dynamic changes that

may be encountered during system operation and may not be present

during the tuning.

• Increase the Differential Gain. In this example, it was increased to 250.

When the Differential gain is high enough, the drive output may look

fuzzy:

1 2 ... 60 61 62 63 64 65 66 67 68

No comments

Delta RMC101 User Manual Page 65