Delta RMC70 User Manual download pdf (Page 19)

Step 9: Connect Feedback Device

deltamotion.com 17

MA Module–Start/Stop or PWM

1. In the Axis Parameters, on the

Setup tab, set the Feedback

Type to MDT.

2. Set the MDT Type register to

the type of MDT transducer

you have. This information is

available on the transducer

datasheet.

3. Click the Download button to apply the changes to the RMC.

4. Continue to the Verify Feedback section on page 19.

MA Module–SSI

1. In the Axis Parameters pane,

on the Setup tab, set the

Feedback Type to SSI.

2. From the information in your

SSI data sheet, set the

following parameters:

 SSI Format

 SSI Data bits (e.g. 24)

 Linear/Rotary

Note: For help on a parameter, click the cell and press F1.

3. Click the Download button to apply the changes to the RMC.

4. Continue to the Verify Feedback section on page 19.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

No comments

Delta RMC70 User Manual Page 19