Delta 30 User Manual download pdf (Page 6)

User Manual | DELTAGuard | General Safety

1.1 This User Manual

n shall be carefully read prior to operating the fume cupboards and their components.

n shall implicitly be observed and applied.

n shall be stored at a place known by and accessible to the staff.

1.2 Safety Symbols

You will see the following symbols with all important safety instructions within this user manual. Strictly observe

these instructions and act especially careful in these situations. Marking of the safety instructions:

DANGER!

This sign shows a risk of injury for one´s life, if particular rules of conduct are disregarded. Whenever

you see this sign in the user manual please take all necessary safety precautions.

ATTENTION!

This sign cautions you against material damages and ﬁnancial as well as criminal disadvantages (e.g.

loss of warranty, liability cases).

NOTE

Here you will ﬁnd important notes and information.

1.3 Conventional use

n Fume cupboards: The fume cupboards are determined to extract and lead off corrosive gas arising during

chemical processes in a conventional laboratory environment. Each fume cupboard may only be used

according to its determination (approval) and its choice of material that is either chemically, thermally or

mechanically.

n Extract air function display: The function display is exclusively determined to control extract air flows in

laboratory fume cupboards according to DIN EN 14175. Utilization in explosive areas may only be allowed

for special executions and with an exact clarification of the operational conditions.

n Fume cupboard sash control: The fume cupboard sash control is exclusively determined for an automatic

closing of fume cupboards not in use, to protect the staff (splash protection) and to avoid pollutant emission

when people drop across. The automatic fume cupboard sash may not be used in explosive areas.

1 2 3 4 5 6 7 8 9 10 11 ... 41 42

No comments

Delta 30 User Manual Page 6