Delta 45 Specifications Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
DGF =
32 + 4 x DGFa + DGFb
26
ADC12EU050
SNAS444I JANUARY 2008REVISED APRIL 2013
www.ti.com
Decimator Clipping Control Register
Address: 14h
Attributes: Write Only
Register 15h reads back contents of Register 14h
b[7] b[6] b[5] b[4] b[3] b[2] b[1] b[0] HEX
Description CGS Reserved a[2:0] b[2:0]
Default 0 0 0 0 0 0 0 0 00 h
Bit Description
7 CGS: Custom Gain Setting. This bit is used to override the automatic gain settings for ADC and IOR modes.
If the user wishes to write a custom digital gain coefficient using a[2:0] and b[2:0] of this register, then the CGS
bit must be set.
0 Normal operation Automatic gain settings used
1 Custom Gain Setting Gain setting from a[2:0] and b[2:0] used.
6 Reserved. Write as zero for future compatibility.
5:3 a[2:0]: Digital Gain Coefficient. In clipping mode the input range of an ADC channel is limited to 1.56Vpp. In
ADC mode the input range is 2.10Vpp. The output of the digital filter has to be scaled according to the selected
mode (the filter data has to be mapped in to the 12bit output data), the difference between 1.6Vpp and 2.2Vpp
is -2.6dB, hence the digital filter gain has to be set to 2.6dB when in IOR mode and to 0dB when in clipping
mode (default mode) . This is performed by setting a Digital Gain Factor which is calculated using the following
formula:
The mapping of the coefficient values for a[2:0] is as follows:
011 = Not used. Defaults to 2
010 = 2
001 = 1
000 = 0
111 = -1
110 = -2
101 = Not used. Defaults to -2
100 = Not used. Defaults to -2
The mapping of the coefficient values for b[2:0] is shown below. The table on the following page shows the
available Digital Gain Coefficient settings.
2:0 b[2:0]: Digital Gain Coefficient.
The mapping of the coefficient values for b[2:0] is as follows:
011 = Not used. Defaults to 2
010 = 2
001 = 1
000 = 0
111 = -1
110 = -2
101 = Not used. Defaults to -2
100 = Not used. Defaults to -2
34 Submit Documentation Feedback Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: ADC12EU050
Page view 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Comments to this Manuals

No comments