Delta F-25 User Manual download pdf (Page 17)

DELTA 10 F

13-AUTOMATIC OPERATION (AUTO)

DELTA 10 F can work in automatic mode without a DMX controller. First of all connect the projectors

with a DMX cable (picture below). A maximum quantity of 32 slave units can be connected to the same

Master unit.

To activate Auto mode on the first unit, use the menu to run through the different modes until AUTO

appears on the display, and press enter.

Now it is possible to choose between the different pre-programmed games (CUPr-RAIn-CU01/CU16-

Wh01/Wh16) or ChPr which is user programmable through REC mode. To confirm game activation press

ENTER on the selected GAME.

13.1 CUPr-RAIn-CU01/CU16-Wh01/Wh16

The first unit that will work as a Master should be placed in Automatic mode (AUTO), the other units

have to be placed in 10 channels DMX mode (MODE 10CH) and the DMX address should be set at A001.

For RaIn (rainbow) game it is possible to select the speed for the colour changhing (SPEE).

DIMMER function (in AUTOMATIC MODE) is active for all the programs.

SHUTTER function (in AUTOMATIC MODE) is active only for CU01/CU16 and Wh01/Wh16 macros.

13.2 ChPr MASTER/SLAVE

The first unit that will function as a Master must be set to Automatic mode (AUTO), the other units must

be set to Slave mode (SLAV), selectable through the menu. In this way all the Slave units will be

synchronised with the master and running their own ChPr game.

On the master unit it is possible to vary the Speed time (SPEE) for the colour changhing and the Wait

time (UAIt) between the steps.

Speed time and Wait time on the Master, have priority on the slave units.

NB: It is possible to run GA.Pr on the other units even though these do not have GA.Pr programmed.

You can do this by setting the units to 10 channels DMX mode (MODE 10CH) and selecting DMX address

A001.

MASTER SLAVE 1

SLAVE 2

SLAVE 32

DMX OUT DMX OUTDMX IN DMX IN DMX INDMX OUT

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

No comments

Delta F-25 User Manual Page 17