Delta 4000 Metal Detector User Manual download pdf (Page 8)

THE BASICS OF METAL DETECTING

A hobby metal detector is intended for locating buried metal objects. When

searching for metals, underground or on the surface, you have the following

challenges and objectives:

1. Ignoring signals caused by ground minerals.

2. Ignoring signals caused by metal objects that you do not want to find,

like pull-tabs.

3. Identifying a buried metal object before you dig it up.

4. Estimating the size and depth of objects, to facilitate digging them up.

5. Eliminating the effects of electromagnetic interference from other

electronic devices.

Your Delta metal detector is designed with these things in mind.

1. Ground Minerals

All soils contain minerals. Signals from ground minerals can interfere with

the signals from metal objects you want to find. All soils differ, and can

differ greatly, in the type and amount of ground minerals present. The Delta

has a preset gound eliimination setting. No user adjustment are required.

2. Trash

If searching for coins, which will induce higher tone sounds, you want to

ignore items like aluminum foil, nails, and pull-tabs. These undesirable

items induce lower tones. You can listen to the sounds of all objects

detected, and decide on what you want to dig up. Or you can eliminate

unwanted metals from detection by using the DISCRIMINATION feature.

3. Identifying Buried Objects

When searching in the DISCRIMINATION mode, different objects induce

different tones (high, medium, low) and are classified on the display screen

in different categories from left to right. A 2-digit numerical reading is also

provided in the middle of the display for more precise target identification.

The DISCRIMINATION mode requires motion: sweep the coil over the

metal object.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

No comments

Delta 4000 Metal Detector User Manual Page 8